How To Pair Skullcandy Bluetooth Earbuds Indy ANC

How To Pair Skullcandy Bluetooth Earbuds Indy ANC

How To Pair Skullcandy Bluetooth Earbuds Indy ANC – Today we will talk about How To Pair Skullcandy Bluetooth Earbuds Indy ANC. So please read the article until the end to get complete information about them.

How To Pair Skullcandy Bluetooth Earbuds Indy ANC

The usual process for pairing your Skullcandy Bluetooth Earbuds Indy ANC with a device is as follows:

Put Skullcandy Indy ANC in Pairing Mode

• Verify the battery life of your Indy ANC earbuds.
• Turn on both earphones after removing them from the casing. They might go into pairing mode automatically. If not, adhere to the guidelines below.
• The majority of Skullcandy earbuds may be put into pairing mode by turning them off and holding the pairing button for a short period of time until an LED light starts to flash. If you’re unsure, see the user manual for your particular model.

Turn on Bluetooth on Your Device

• On the device, you want to pair with (a phone, laptop, etc.), go to the Bluetooth settings.
• If Bluetooth isn’t already enabled, turn it on.

Search for Devices

• You ought to see a list of accessible devices in the Bluetooth settings on your device.
• Search the list for your Skullcandy Indy ANC earbuds. They can pose as “Indy ANC” or a similar name.

Connect Skullcandy Indy ANC

• In the list of compatible devices, select your Indy ANC earbuds by tapping or clicking on their entry.
• Your device will make an effort to connect to the earbuds.

Pairing Confirmation

• You’ll probably hear a voice prompt or get an on-screen message when the pairing is successful letting you know the Indy ANC earbuds are now linked.

Using the Paired Earbuds

• When the Indy ANC earbuds are turned on and within range of your device, they should instantly connect after they have been paired.

Note that depending on the individual model of your Skullcandy Indy ANC earphones and the device you are pairing them with, the exact processes may slightly differ from our general directions. If you experience any issues while pairing, consult the user guide that was included with your earphones or go to the Skullcandy website for more thorough instructions and troubleshooting advice.

Skullcandy Indy Anc Earbuds – How To Enter Ambient Mode?

You only need to tap the touch panel in any earbud once and hold it there for two seconds to activate Ambient Mode. They will automatically enter this mode in this manner.

Skullcandy Indy Anc Earbuds – App Guide

The Skullcandy App is compatible with the Skullcandy Indy Anc earbuds. This can be used to activate Ambient Mode, turn on or off ANC, make a custom sound profile, switch EQ modes, and access user manuals or support for issues.

Skullcandy Indy Anc Earbuds – Controls

• Turn auto on – From the charging case, remove the earbuds.
• Power on – Any of the earbuds’ touch panels should be touched and held there for 4 seconds.
• Turn auto-off – Affix the charging case to the earbuds.
• Power off – Any of the earbuds’ touch panels should be touched and held there for 6 seconds.
• Trackback – For 2 seconds, press and hold the left earbud’s touch panel.
• Track forward – Touch and hold the right earbud’s touch panel for two seconds.
• Volume up – Once press the touchpad on the right earbud.
• Volume down – Once press the touchpad on the left earbud.
• Play/Pause music – Any earbud’s touch panel should be activated twice.
• Answer/End calls – Any earbud with a touch panel should be double-tapped.
• Activate assistant – Any earbud’s touch panel should be tapped three times.
• EQ mode – On either of the earbuds, double-tap the touch panel and hold the position for two seconds.
• Clear/Reset – Off, touch, and gold for 10 seconds on both earbud touch panels.

Also Read,

• How To Pair Samsung Buds With Laptop
• Jlab Earbuds Not Pairing Together – What Should We Do?
• How can a User Switch EQ Modes in MI Portable Speaker?